Re: Burned Flash card does not work in B slot
[ Follow Ups ] [ Post Followup ] [ The QuadraSynth Forum ] [ FAQ ]
Posted by Wahilde on November 16, 2006 at 22:40:23:
In Reply to: Re: Burned Flash card does not work in B slot posted by body on October 17, 2006 at 12:04:08:
: : : : Let me know if you are using 8 MB AMD linear D's
: : : No, I'm using 10 MB cards. I might be a size problem. I have noticed one more problem: if I use the burned card in A slot with a ROM card in B slot, the patches from the burned card do not sound good, the samples has noises and nasty artifacts. If I replace the rom card with an S-Ram card (or I leave the B slot empty), the sound from the burned card is perfect.
: : : It sounds curious, doesn't it?
: : : Regards,
: : : Angel
: : I'm convinced now, of course its only with a sample size of 2, that flash cards over 8MB will not work in the B slot (on either QSR or QS8) they burn and work fine in A slot.
: : But I have not had the other issue with bad sounds or noise with a ROM card in second slot (at least I have not noticed any problems and I just gave it a quick listen so cant help you there)
: : larry
: OK - I just bought a 8MB Flash card from Midiworld (sponsors of this site) burnt an image on QSR (AND AGAIN ON QS8). Card works fine in slot A but NOT slot B. Different manufactures for each card. Now I need to try a Pretec or OLDER/different card if I can get my hands on one. But so far I cant get cards to work in second slot.
: No biggie but it would give me some flex.
Please post messages on the new QuadraSynth Forum