[ Follow Ups ] [ Post Message ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Joakim on January 02, 1999 at 19:29:31:

In Reply to: Re: SERIAL DRIVER posted by chodan on December 31, 1998 at 00:03:33:

Before you do anything to your BIOS make sure you
complete step 3 on page 14 in the manual. The
QS 6.1 is set to listen to the MIDI in as default,
so you have to change that to the serial interface.

: I had the same problem also ,it turned out that my second serial port was disabled
: and the first was being used by the modem
: You will have to go into your computers bios and look in it to see if that is the
: problem if you don`t know how to do that get your local computer guru to help you.
: maybe that will solve your problem it did mine

: : I installed the serial driver and put the baud rate to 38.4k and it does not detect my qs6.1 . I don't want to purchase a midi me!

Follow Ups: