Re: Accessing Bank on Flash Ram Card

[ Follow Ups ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Chris on January 21, 2000 at 16:33:02:

In Reply to: Accessing Bank on Flash Ram Card posted by Matt S. on January 20, 2000 at 15:18:29:

If the card is working with QS, then, after the bank "GenMIDI" and before the bank "USER" you must see the bank "CardA-1". If you don't see maybe you don't burn it right from Soundbridge or the card isn't right for QS synth. The bank "CardA-1" appears and dissapears instantly after put and remove it from slot (if everything is OK).


1. Look if QS works fine with other programs. Does it work allright with your sequencer (cakewalk, cubase etc)? Does it work allright with "Unisyn" or other programs that use midi communication with your synth?

2. Open Soundbridge. Select menu “Project” / “Card info…” and select the size of your card. Then select “Project” / “Midi setup…” and select the driver you use (serial or your sound card’s Midi in / out).
Did you make these before?

4. Give attentions that cards have a small switch on them that make the card read only or ready to write. Something similar to floppy disks. Is your card ready to write?

3. Download this zip file to read my guide for QScards:

Follow Ups: