Posted by ROB RIG on December 04, 2004 at 20:20:39:
WHEN I CONNECT THE DIN8 CABLE TO THE QS 8.1 SERIAL PORT THE QS8.1 BEGINS TO ACT WEIRD: IT PLAYS WRONG NOTES AND HAS A SUSTAIN. I REINITIALIZED THE GLOBAL SETTINGS (0 AND 3) AND PROBLEM CLEARED UP. WHEN I GO BACK INTO GLOBAL SETTINGS TO USE THE QS WITH MY PC (PAGE 15 SET I/O TO PC 38.4 KBAUD) THE QS AGAIN STARTS TO ACT WEIRD. IT DOESN'T MAKE ANY DIFFERENCE IF THE OTHER END (DB9)OF THE CABLE IS CONNECTED OR DISCONNECTED TO THE PC. THE PROBLEM IS WHEN I PLUG IN THE DIN 8 END. I ALREADY BOUGHT A NEW CABLE BECAUSE I FIGURED MY OLD CABLE WAS BAD AND IT DIDN'T SOLVE ANYTHING.
ANY SUGGESTIONS AS TO WHY THIS IS HAPPENING?
ROB RIG