Re: Basic midi setup

[ Follow Ups ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Rod on April 26, 2002 at 11:36:27:

In Reply to: Re: Basic midi setup posted by Brian on April 26, 2002 at 10:56:43:


Alright. I would start sequencing with it in prog mode 1st.. it's easier.

Midi out qs to midi in delta, and in qs to midi out delta.

Make sure the qs is set to channel 1

to record, there should be an option in the vst ( I don't use it), to turn echo on/off. If echo is on, make sure the QS is in OUT 1 mode. If it's off, the qs can in normal mode.

I would try two experiments:
(1) Add some notes to a track directly into cubase, without using the keyboard. Set the output of the track to midi chan 1. make sure the qs in set to midi channel 1. Try to play the file. You should hear something in the qs.

(2) Try to record something. Arm the track to record, and play something. Press stop. You should be able to hear your track.

I apologize if this is too simple.. it's a good way to start.

If you can get this part to work, the rest just follows through.


Follow Ups: